# NAME

Pod::Usage - extracts POD documentation and shows usage information

# SYNOPSIS

```perl
use Pod::Usage;

my $message_text  = "This text precedes the usage message.";
my $exit_status   = 2;          ## The exit status to use
my $verbose_level = 0;          ## The verbose level to use
my $filehandle    = \*STDERR;   ## The filehandle to write to

pod2usage($message_text);

pod2usage($exit_status);

pod2usage( { -message => $message_text ,
             -exitval => $exit_status  ,
             -verbose => $verbose_level,
             -output  => $filehandle } );

pod2usage(   -msg     => $message_text ,
             -exitval => $exit_status  ,
             -verbose => $verbose_level,
             -output  => $filehandle );

pod2usage(   -verbose => 2,
             -noperldoc => 1  );

pod2usage(   -verbose => 2,
             -perlcmd => $path_to_perl,
             -perldoc => $path_to_perldoc,
             -perldocopt => $perldoc_options );
```

# ARGUMENTS

**pod2usage** should be given either a single argument, or a list of
arguments corresponding to an associative array (a "hash"). When a single
argument is given, it should correspond to exactly one of the following:

- A string containing the text of a message to print _before_ printing
the usage message
- A numeric value corresponding to the desired exit status
- A reference to a hash

If more than one argument is given then the entire argument list is
assumed to be a hash.  If a hash is supplied (either as a reference or
as a list) it should contain one or more elements with the following
keys:

- `-message` _string_
- `-msg` _string_

    The text of a message to print immediately prior to printing the
    program's usage message.

- `-exitval` _value_

    The desired exit status to pass to the **exit()** function.
    This should be an integer, or else the string `NOEXIT` to
    indicate that control should simply be returned without
    terminating the invoking process.

- `-verbose` _value_

    The desired level of "verboseness" to use when printing the usage message.
    If the value is 0, then only the "SYNOPSIS" and/or "USAGE" sections of the
    pod documentation are printed. If the value is 1, then the "SYNOPSIS" and/or
    "USAGE" sections, along with any section entitled "OPTIONS", "ARGUMENTS", or
    "OPTIONS AND ARGUMENTS" is printed. If the corresponding value is 2 or more
    then the entire manpage is printed, using [perldoc](https://metacpan.org/pod/perldoc) if available; otherwise
    [Pod::Text](https://metacpan.org/pod/Pod%3A%3AText) is used for the formatting. For better readability, the
    all-capital headings are downcased, e.g. `SYNOPSIS` => `Synopsis`.

    The special verbosity level 99 requires to also specify the -sections
    parameter; then these sections are extracted and printed.

- `-sections` _spec_

    There are two ways to specify the selection. Either a string (scalar)
    representing a selection regexp for sections to be printed when -verbose
    is set to 99, e.g.

    ```
    "NAME|SYNOPSIS|DESCRIPTION|VERSION"
    ```

    With the above regexp all content following (and including) any of the
    given `=head1` headings will be shown. It is possible to restrict the
    output to particular subsections only, e.g.:

    ```
    "DESCRIPTION/Algorithm"
    ```

    This will output only the `=head2 Algorithm` heading and content within
    the `=head1 DESCRIPTION` section. The regexp binding is stronger than the
    section separator, such that e.g.:

    ```
    "DESCRIPTION|OPTIONS|ENVIRONMENT/Caveats"
    ```

    will print any `=head2 Caveats` section (only) within any of the three
    `=head1` sections.

    Alternatively, an array reference of section specifications can be used:

    ```perl
    pod2usage(-verbose => 99, -sections => [
      qw(DESCRIPTION DESCRIPTION/Introduction) ] );
    ```

    This will print only the content of `=head1 DESCRIPTION` and the
    `=head2 Introduction` sections, but no other `=head2`, and no other
    `=head1` either.

- `-output` _handle_

    A reference to a filehandle, or the pathname of a file to which the
    usage message should be written. The default is `\*STDERR` unless the
    exit value is less than 2 (in which case the default is `\*STDOUT`).

- `-input` _handle_

    A reference to a filehandle, or the pathname of a file from which the
    invoking script's pod documentation should be read.  It defaults to the
    file indicated by `$0` (`$PROGRAM_NAME` for users of `English.pm`).

    If you are calling **pod2usage()** from a module and want to display
    that module's POD, you can use this:

    ```perl
    use Pod::Find qw(pod_where);
    pod2usage( -input => pod_where({-inc => 1}, __PACKAGE__) );
    ```

- `-pathlist` _string_

    A list of directory paths. If the input file does not exist, then it
    will be searched for in the given directory list (in the order the
    directories appear in the list). It defaults to the list of directories
    implied by `$ENV{PATH}`. The list may be specified either by a reference
    to an array, or by a string of directory paths which use the same path
    separator as `$ENV{PATH}` on your system (e.g., `:` for Unix, `;` for
    MSWin32 and DOS).

- `-noperldoc`

    By default, Pod::Usage will call [perldoc](https://metacpan.org/pod/perldoc) when -verbose >= 2 is specified.
    This does not work well e.g. if the script was packed with [PAR](https://metacpan.org/pod/PAR). This option
    suppresses the external call to [perldoc](https://metacpan.org/pod/perldoc) and uses the simple text formatter
    ([Pod::Text](https://metacpan.org/pod/Pod%3A%3AText)) to output the POD.

- `-perlcmd`

    By default, Pod::Usage will call [perldoc](https://metacpan.org/pod/perldoc) when -verbose >= 2 is
    specified. In case of special or unusual Perl installations,
    this option may be used to supply the path to a [perl](https://metacpan.org/pod/perl) executable
    which should run [perldoc](https://metacpan.org/pod/perldoc).

- `-perldoc` _path-to-perldoc_

    By default, Pod::Usage will call [perldoc](https://metacpan.org/pod/perldoc) when -verbose >= 2 is
    specified. In case [perldoc](https://metacpan.org/pod/perldoc) is not installed where the [perl](https://metacpan.org/pod/perl) interpreter
    thinks it is (see [Config](https://metacpan.org/pod/Config)), the -perldoc option may be used to supply
    the correct path to [perldoc](https://metacpan.org/pod/perldoc).

- `-perldocopt` _string_

    By default, Pod::Usage will call [perldoc](https://metacpan.org/pod/perldoc) when -verbose >= 2 is specified.
    This option may be used to supply options to [perldoc](https://metacpan.org/pod/perldoc). The
    string may contain several, space-separated options.

## Formatting base class

The default text formatter is [Pod::Text](https://metacpan.org/pod/Pod%3A%3AText). The base class for Pod::Usage can
be defined by pre-setting `$Pod::Usage::Formatter` _before_
loading Pod::Usage, e.g.:

```perl
BEGIN { $Pod::Usage::Formatter = 'Pod::Text::Termcap'; }
use Pod::Usage qw(pod2usage);
```

Pod::Usage uses [Pod::Simple](https://metacpan.org/pod/Pod%3A%3ASimple)'s \_handle\_element\_end() method to implement
the section selection, and in case of verbosity < 2 it down-cases the
all-caps headings to first capital letter and rest lowercase, and adds
a colon/newline at the end of the headings, for better readability. Same for
verbosity = 99.

## Pass-through options

The following options are passed through to the underlying text formatter.
See the manual pages of these modules for more information.

```
alt code indent loose margin quotes sentence stderr utf8 width
```

# DESCRIPTION

**pod2usage** will print a usage message for the invoking script (using
its embedded pod documentation) and then exit the script with the
desired exit status. The usage message printed may have any one of three
levels of "verboseness": If the verbose level is 0, then only a synopsis
is printed. If the verbose level is 1, then the synopsis is printed
along with a description (if present) of the command line options and
arguments. If the verbose level is 2, then the entire manual page is
printed.

Unless they are explicitly specified, the default values for the exit
status, verbose level, and output stream to use are determined as
follows:

- If neither the exit status nor the verbose level is specified, then the
default is to use an exit status of 2 with a verbose level of 0.
- If an exit status _is_ specified but the verbose level is _not_, then the
verbose level will default to 1 if the exit status is less than 2 and
will default to 0 otherwise.
- If an exit status is _not_ specified but verbose level _is_ given, then
the exit status will default to 2 if the verbose level is 0 and will
default to 1 otherwise.
- If the exit status used is less than 2, then output is printed on
`STDOUT`.  Otherwise output is printed on `STDERR`.

Although the above may seem a bit confusing at first, it generally does
"the right thing" in most situations.  This determination of the default
values to use is based upon the following typical Unix conventions:

- An exit status of 0 implies "success". For example, **diff(1)** exits
with a status of 0 if the two files have the same contents.
- An exit status of 1 implies possibly abnormal, but non-defective, program
termination.  For example, **grep(1)** exits with a status of 1 if
it did _not_ find a matching line for the given regular expression.
- An exit status of 2 or more implies a fatal error. For example, **ls(1)**
exits with a status of 2 if you specify an illegal (unknown) option on
the command line.
- Usage messages issued as a result of bad command-line syntax should go
to `STDERR`.  However, usage messages issued due to an explicit request
to print usage (like specifying **-help** on the command line) should go
to `STDOUT`, just in case the user wants to pipe the output to a pager
(such as **more(1)**).
- If program usage has been explicitly requested by the user, it is often
desirable to exit with a status of 1 (as opposed to 0) after issuing
the user-requested usage message.  It is also desirable to give a
more verbose description of program usage in this case.

**pod2usage** does not force the above conventions upon you, but it will
use them by default if you don't expressly tell it to do otherwise.  The
ability of **pod2usage()** to accept a single number or a string makes it
convenient to use as an innocent looking error message handling function:

```perl
use strict;
use Pod::Usage;
use Getopt::Long;

## Parse options
my %opt;
GetOptions(\%opt, "help|?", "man", "flag1")  ||  pod2usage(2);
pod2usage(1)  if ($opt{help});
pod2usage(-exitval => 0, -verbose => 2)  if ($opt{man});

## Check for too many filenames
pod2usage("$0: Too many files given.\n")  if (@ARGV > 1);
```

Some user's however may feel that the above "economy of expression" is
not particularly readable nor consistent and may instead choose to do
something more like the following:

```perl
use strict;
use Pod::Usage qw(pod2usage);
use Getopt::Long qw(GetOptions);

## Parse options
my %opt;
GetOptions(\%opt, "help|?", "man", "flag1")  ||
  pod2usage(-verbose => 0);

pod2usage(-verbose => 1)  if ($opt{help});
pod2usage(-verbose => 2)  if ($opt{man});

## Check for too many filenames
pod2usage(-verbose => 2, -message => "$0: Too many files given.\n")
  if (@ARGV > 1);
```

As with all things in Perl, _there's more than one way to do it_, and
**pod2usage()** adheres to this philosophy.  If you are interested in
seeing a number of different ways to invoke **pod2usage** (although by no
means exhaustive), please refer to ["EXAMPLES"](#examples).

## Scripts

The Pod::Usage distribution comes with a script pod2usage which offers
a command line interface to the functionality of Pod::Usage. See
[pod2usage](https://metacpan.org/pod/pod2usage).

# EXAMPLES

Each of the following invocations of `pod2usage()` will print just the
"SYNOPSIS" section to `STDERR` and will exit with a status of 2:

```perl
pod2usage();

pod2usage(2);

pod2usage(-verbose => 0);

pod2usage(-exitval => 2);

pod2usage({-exitval => 2, -output => \*STDERR});

pod2usage({-verbose => 0, -output  => \*STDERR});

pod2usage(-exitval => 2, -verbose => 0);

pod2usage(-exitval => 2, -verbose => 0, -output => \*STDERR);
```

Each of the following invocations of `pod2usage()` will print a message
of "Syntax error." (followed by a newline) to `STDERR`, immediately
followed by just the "SYNOPSIS" section (also printed to `STDERR`) and
will exit with a status of 2:

```perl
pod2usage("Syntax error.");

pod2usage(-message => "Syntax error.", -verbose => 0);

pod2usage(-msg  => "Syntax error.", -exitval => 2);

pod2usage({-msg => "Syntax error.", -exitval => 2, -output => \*STDERR});

pod2usage({-msg => "Syntax error.", -verbose => 0, -output => \*STDERR});

pod2usage(-msg  => "Syntax error.", -exitval => 2, -verbose => 0);

pod2usage(-message => "Syntax error.",
          -exitval => 2,
          -verbose => 0,
          -output  => \*STDERR);
```

Each of the following invocations of `pod2usage()` will print the
"SYNOPSIS" section and any "OPTIONS" and/or "ARGUMENTS" sections to
`STDOUT` and will exit with a status of 1:

```perl
pod2usage(1);

pod2usage(-verbose => 1);

pod2usage(-exitval => 1);

pod2usage({-exitval => 1, -output => \*STDOUT});

pod2usage({-verbose => 1, -output => \*STDOUT});

pod2usage(-exitval => 1, -verbose => 1);

pod2usage(-exitval => 1, -verbose => 1, -output => \*STDOUT});
```

Each of the following invocations of `pod2usage()` will print the
entire manual page to `STDOUT` and will exit with a status of 1:

```perl
pod2usage(-verbose  => 2);

pod2usage({-verbose => 2, -output => \*STDOUT});

pod2usage(-exitval  => 1, -verbose => 2);

pod2usage({-exitval => 1, -verbose => 2, -output => \*STDOUT});
```

## Recommended Use

Most scripts should print some type of usage message to `STDERR` when a
command line syntax error is detected. They should also provide an
option (usually `-H` or `-help`) to print a (possibly more verbose)
usage message to `STDOUT`. Some scripts may even wish to go so far as to
provide a means of printing their complete documentation to `STDOUT`
(perhaps by allowing a `-man` option). The following complete example
uses **Pod::Usage** in combination with **Getopt::Long** to do all of these
things:

```perl
use strict;
use Getopt::Long qw(GetOptions);
use Pod::Usage qw(pod2usage);

my $man = 0;
my $help = 0;
## Parse options and print usage if there is a syntax error,
## or if usage was explicitly requested.
GetOptions('help|?' => \$help, man => \$man) or pod2usage(2);
pod2usage(1) if $help;
pod2usage(-verbose => 2) if $man;

## If no arguments were given, then allow STDIN to be used only
## if it's not connected to a terminal (otherwise print usage)
pod2usage("$0: No files given.")  if ((@ARGV == 0) && (-t STDIN));

__END__

=head1 NAME

sample - Using GetOpt::Long and Pod::Usage

=head1 SYNOPSIS

sample [options] [file ...]

 Options:
   -help            brief help message
   -man             full documentation

=head1 OPTIONS

=over 4

=item B<-help>

Print a brief help message and exits.

=item B<-man>

Prints the manual page and exits.

=back

=head1 DESCRIPTION

B<This program> will read the given input file(s) and do something
useful with the contents thereof.

=cut
```

# CAVEATS

By default, **pod2usage()** will use `$0` as the path to the pod input
file.  Unfortunately, not all systems on which Perl runs will set `$0`
properly (although if `$0` is not found, **pod2usage()** will search
`$ENV{PATH}` or else the list specified by the `-pathlist` option).
If this is the case for your system, you may need to explicitly specify
the path to the pod docs for the invoking script using something
similar to the following:

```perl
pod2usage(-exitval => 2, -input => "/path/to/your/pod/docs");
```

In the pathological case that a script is called via a relative path
_and_ the script itself changes the current working directory
(see ["chdir" in perlfunc](https://metacpan.org/pod/perlfunc#chdir)) _before_ calling pod2usage, Pod::Usage will
fail even on robust platforms. Don't do that. Or use [FindBin](https://metacpan.org/pod/FindBin) to locate
the script:

```perl
use FindBin;
pod2usage(-input => $FindBin::Bin . "/" . $FindBin::Script);
```

# SUPPORT

This module is managed in a GitHub repository,
[https://github.com/Dual-Life/Pod-Usage](https://github.com/Dual-Life/Pod-Usage) Feel free to fork and contribute, or
to clone and send patches!

Please use [https://github.com/Dual-Life/Pod-Usage/issues/new](https://github.com/Dual-Life/Pod-Usage/issues/new) to file a bug
report.  The previous ticketing system,
[https://rt.cpan.org/Dist/Display.html?Queue=Pod-Usage](https://rt.cpan.org/Dist/Display.html?Queue=Pod-Usage), is deprecated for
this package.

More general questions or discussion about POD should be sent to the
`pod-people@perl.org` mail list. Send an empty email to
`pod-people-subscribe@perl.org` to subscribe.

# AUTHOR

Marek Rouchal <marekr@cpan.org>

Nicolas R <nicolas@atoomic.org>

Brad Appleton <bradapp@enteract.com>

Based on code for **Pod::Text::pod2text()** written by
Tom Christiansen <tchrist@mox.perl.com>

# LICENSE

Pod::Usage (the distribution) is licensed under the same terms as Perl.

# ACKNOWLEDGMENTS

Nicolas R (ATOOMIC) for setting up the Github repo and modernizing this
package.

rjbs for refactoring Pod::Usage to not use Pod::Parser any more.

Steven McDougall <swmcd@world.std.com> for his help and patience with
re-writing this manpage.

# SEE ALSO

**Pod::Usage** is now a standalone distribution, depending on
[Pod::Text](https://metacpan.org/pod/Pod%3A%3AText) which in turn depends on [Pod::Simple](https://metacpan.org/pod/Pod%3A%3ASimple).

[Pod::Perldoc](https://metacpan.org/pod/Pod%3A%3APerldoc), [Getopt::Long](https://metacpan.org/pod/Getopt%3A%3ALong), [Pod::Find](https://metacpan.org/pod/Pod%3A%3AFind), [FindBin](https://metacpan.org/pod/FindBin),
[Pod::Text](https://metacpan.org/pod/Pod%3A%3AText), [Pod::Text::Termcap](https://metacpan.org/pod/Pod%3A%3AText%3A%3ATermcap), [Pod::Simple](https://metacpan.org/pod/Pod%3A%3ASimple)