ECM-FIND-MODULES(7)

NAME
ecm-find-modules - ECM Find Modules Reference

INTRODUCTION

Find modules are used by the CMake find_package command to search for packages that do not provide their own CMake package config files. CMake provides an extensive set of find modules, and Extra CMake Modules (ECM) adds to that.

To use ECM’s find modules, you need to tell CMake to find the ECM package, and then add either ${ECM_MODULE_PATH} or ${ECM_FIND_MODULE_DIR} to the CMAKE_MODULE_PATH variable:

    find_package(ECM REQUIRED NO_MODULE)
    set(CMAKE_MODULE_PATH ${ECM_FIND_MODULE_DIR})

Using ${ECM_MODULE_PATH} will also make the modules intended for direct use by CMake scripts available (see ecm-modules(7) <#manual:ecm-modules(7)> and ecm-kde-modules(7) <#manual:ecm-kde-modules(7)>).

You can also make local copies of find modules using the ecm_use_find_modules function from ECMUseFindModules <#module:ECMUseFindModules>, which is automatically included when ECM is found:

    find_package(ECM REQUIRED NO_MODULE)
    ecm_use_find_modules(
        DIR "${CMAKE_BINARY_DIR}/cmake"
        MODULES FindEGL.cmake
    )
    set(CMAKE_MODULE_PATH "${CMAKE_BINARY_DIR}/cmake")

This allows selective use of ECM’s find modules, and the NO_OVERRIDE argument can be used to ensure that if CMake ships its own version of that find module, it will be used instead.

ALL FIND MODULES

  Find7Zip

Try to find 7-Zip.

If the 7-Zip executable is not in your PATH, you can provide an alternative name or full path location with the 7Zip_EXECUTABLE variable.

This will define the following variables:

7Zip_FOUND
    TRUE if 7-Zip is available

7Zip_EXECUTABLE
    Path to 7-Zip executable

    If 7Zip_FOUND is TRUE, it will also define the following imported target:

7Zip::7Zip
    Path to 7-Zip executable

    Note: It will see to only find the original 7-Zip, not one of the p7zip forks.

    Since 5.113.0.

  Find7z

Try to find 7z.

If the 7z executable is not in your PATH, you can provide an alternative name or full path location with the 7z_EXECUTABLE variable.

This will define the following variables:

7z_FOUND
    TRUE if 7z is available

7z_EXECUTABLE
    Path to 7z executable

    If 7z_FOUND is TRUE, it will also define the following imported target:

7z::7z
    Path to 7z executable

    Note: Only works on Windows.

    Deprecated: since 5.113, use Find7Zip <#find-module:Find7Zip>.

    Since 5.85.0.

  FindCanberra

Try to find Canberra event sound library.

This will define the following variables:

Canberra_FOUND
    True if (the requested version of) Canberra is available

Canberra_VERSION
    The version of Canberra

Canberra_LIBRARIES
    The libraries of Canberra for use with target_link_libraries()

Canberra_INCLUDE_DIRS
    The include dirs of Canberra for use with target_include_directories()

    If Canberra_FOUND is TRUE, it will also define the following imported target:

Canberra::Canberra
    The Canberra library

    In general we recommend using the imported target, as it is easier to use. Bear in mind, however, that if the target is in the link interface of an exported library, it must be made available by the package config file.

    Since 5.56.0.

  FindEGL

Try to find EGL.

This will define the following variables:

EGL_FOUND
    True if (the requested version of) EGL is available

EGL_VERSION
    The version of EGL; note that this is the API version defined in the headers, rather than the version of the implementation (eg: Mesa)

EGL_LIBRARIES
    This can be passed to target_link_libraries() instead of the EGL::EGL target

EGL_INCLUDE_DIRS
    This should be passed to target_include_directories() if the target is not used for linking

EGL_DEFINITIONS
    This should be passed to target_compile_options() if the target is not used for linking

    If EGL_FOUND is TRUE, it will also define the following imported target:

EGL::EGL
    The EGL library

    In general we recommend using the imported target, as it is easier to use. Bear in mind, however, that if the target is in the link interface of an exported library, it must be made available by the package config file.

    Since pre-1.0.0.

  FindFFmpeg

Try to find FFmpeg components.

The following components are available:

    AVCODEC  AVFILTER    AVDEVICE  AVFORMAT
    AVUTIL   SWRESAMPLE  SWSCALE   POSTPROCESS

If no components are specified in the find_module call, the following ones will be chosen as default:

    AVFORMAT AVUTIL AVCODEC

  Imported Targets

This module provides the following imported targets, if found:

FFmpeg::FFmpeg
    For all the required FFmpeg components

FFmpeg::<component>
    For each <component> that was found

  Result Variables

This will define the following variables:

FFMPEG_FOUND
    System has the all required components.

FFMPEG_INCLUDE_DIRS
    Include directory necessary for using the required components headers.

FFMPEG_LIBRARIES
    Link these to use the required FFmpeg components.

FFMPEG_DEFINITIONS
    Compiler switches required for using the required FFmpeg components.

    Additionally for each of the components, the following variables will be defined:

<component>_FOUND
    True if (the requestion version of) <component> is available

<component>_INCLUDE_DIRS
    Include directory necessary for using the <component> headers

<component>_LIBRARIES
    Link these to use <component>

<component>_DEFINITIONS
    Compiler switches required for using <component>

<component>_VERSION
    The components version (NOTE: always empty on Windows)

    As the versions of the various FFmpeg components differ for a given release, and CMake supports only one common version for all components, use the following to specify required versions for multiple components:

        find_package(FFmpeg 57.48 COMPONENTS AVCODEC)
        find_package(FFmpeg 57.40 COMPONENTS AVFORMAT)
        find_package(FFmpeg 55.27 COMPONENTS AVUTIL)

    NOTE: version checking is skipped on Windows

    Since 6.20.0.

  FindGLIB2

Try to locate the GLib2 library. If found, this will define the following variables:

GLIB2_FOUND
    True if the GLib2 library is available

GLIB2_INCLUDE_DIRS
    The GLib2 include directories

GLIB2_LIBRARIES
    The GLib2 libraries for linking

GLIB2_INCLUDE_DIR
    Deprecated, use GLIB2_INCLUDE_DIRS

GLIB2_LIBRARY
    Deprecated, use GLIB2_LIBRARIES

    If GLIB2_FOUND is TRUE, it will also define the following imported target:

GLIB2::GLIB2
    The GLIB2 library

GLIB2::GTHREAD2
    The GThread2 library (since 6.7.0)

GLIB2::GOBJECT
    The GObject library (since 6.7.0)

GLIB2::GIO
    The GIO library (since 6.7.0)

    Since 5.41.0.

  FindGperf

Try to find GNU gperf.

If the gperf executable is not in your PATH, you can provide an alternative name or full path location with the Gperf_EXECUTABLE variable.

This will define the following variables:

Gperf_FOUND
    True if gperf is available.

Gperf_EXECUTABLE
    The gperf executable.

Gperf_VERSION
    The gperf version. (since 5.85)

    If Gperf_FOUND is TRUE, it will also define the following imported target:

GPerf::Gperf
    The gperf executable.

    and the following public function:

        ecm_gperf_generate(<GperfInput> <OutputFile> <OutputVariable(|target (since 5.83))>
                           [GENERATION_FLAGS <flags>])

    Run gperf on <GperfInput> to generate <OutputFile>, adding it to the <OutputVariable> variable which contains the source for the target where <OutputFile> is going to be built or, since KF 5.83, if the given argument is a target, to the list of private sources of that target. The target must not be an alias. The optional GENERATION_FLAGS argument is needed to pass extra parameters to gperf (note you cannot override that way the output file).

    A simple invocation would be:

        ecm_gperf_generate(simple.gperf ${CMAKE_CURRENT_BINARY_DIR}/simple.h MySources)

    Since 5.35.0.

  FindGradle

Provides the ability to build Android AAR libraries using Gradle.

This relies on the Qt provided Gradle, so a Qt for Android installation is required.

    gradle_add_aar(<target>
                   BUIDLFILE build.gradle
                   NAME <aar-name>)

This builds an Android AAR library using the given build.gradle file.

    gradle_install_aar(<target>
                       DESTINATION <dest>)

Installs a Android AAR library that has been created with gradle_add_aar.

Since 5.76.0.

  FindIcoTool

Try to find icotool.

If the icotool executable is not in your PATH, you can provide an alternative name or full path location with the IcoTool_EXECUTABLE variable.

This will define the following variables:

IcoTool_FOUND
    True if icotool is available.

IcoTool_EXECUTABLE
    The icotool executable.

    If IcoTool_FOUND is TRUE, it will also define the following imported target:

IcoTool::IcoTool
    The icotool executable.

    Since 5.49.

  FindInotify

Try to find inotify on this system. This finds:

•   libinotify on Unix like systems, or

•   the kernel’s inotify.

    This will define the following variables:

Inotify_FOUND
    True if inotify is available

Inotify_LIBRARIES
    This has to be passed to target_link_libraries()

Inotify_INCLUDE_DIRS
    This has to be passed to target_include_directories()

    On some platforms like Linux and SunOS, the libraries and include directories are empty, even though Inotify_FOUND may be set to TRUE. This is because no special includes or libraries are needed. On other systems these may be needed to use inotify.

    Since 5.32.0.

  FindIsoCodes

Try to find iso-codes data files. Once done this will define:

IsoCodes_FOUND
    Whether the system has iso-codes

IsoCodes_PREFIX
    The location in which the iso-codes data files are found

IsoCodes_DOMAINS
    The available domains provided by iso-codes

    Since 5.80.0.

  FindKF5

Find KDE Frameworks 5 with a single find_package() call.

This will use the package config files provided by the individual frameworks. For example, if you wish to find KArchive, which presents itself to CMake as KF5Archive (ie: you would do find_package(KF5Archive) to find it directly), you can do

    find_package(KF5 COMPONENTS Archive)

If all the required components (those given in the COMPONENTS argument, but not those given in the OPTIONAL_COMPONENTS argument) are found, KF5_FOUND will be set to true. Otherwise, it will be set to false.

Since pre-1.0.0.

  FindKF6

Find KDE Frameworks 6 with a single find_package() call.

This will use the package config files provided by the individual frameworks. For example, if you wish to find KArchive, which presents itself to CMake as KF6Archive (ie: you would do find_package(KF6Archive) to find it directly), you can do

    find_package(KF6 COMPONENTS Archive)

If all the required components (those given in the COMPONENTS argument, but not those given in the OPTIONAL_COMPONENTS argument) are found, KF6_FOUND will be set to true. Otherwise, it will be set to false.

Since 6.0.0.

  FindLibExiv2

Try to find the Exiv2 library.

This will define the following variables:

LibExiv2_FOUND
    True if (the requested version of) Exiv2 is available

LibExiv2_VERSION
    The version of Exiv2

LibExiv2_INCLUDE_DIRS
    The include dirs of Exiv2 for use with target_include_directories()

LibExiv2_LIBRARIES
    The Exiv2 library for use with target_link_libraries(). This can be passed to target_link_libraries() instead of the LibExiv2::LibExiv2 target

    If LibExiv2_FOUND is TRUE, it will also define the following imported target:

LibExiv2::LibExiv2
    The Exiv2 library

    In general we recommend using the imported target, as it is easier to use. Bear in mind, however, that if the target is in the link interface of an exported library, it must be made available by the package config file.

    Since 5.53.0.

  FindLibGit2

Try to find libgit2 on a Unix system.

This will define the following variables:

LIBGIT2_FOUND
    True if (the requested version of) libgit2 is available

LIBGIT2_VERSION
    The version of libgit2

LIBGIT2_LIBRARIES
    This can be passed to target_link_libraries() instead of the LibGit2::LibGit2 target

LIBGIT2_INCLUDE_DIRS
    This should be passed to target_include_directories() if the target is not used for linking

LIBGIT2_DEFINITIONS
    This should be passed to target_compile_options() if the target is not used for linking

    If LIBGIT2_FOUND is TRUE, it will also define the following imported target:

LibGit2::LibGit2
    The libgit2 library

    In general we recommend using the imported target, as it is easier to use. Bear in mind, however, that if the target is in the link interface of an exported library, it must be made available by the package config file.

    Since 1.3.0.

  FindLibMount

Try to find the libmount library (part of util-linux), once done this will define:

LibMount_FOUND
    LibMount was found on the system.

LibMount_INCLUDE_DIRS
    The libmount include directory.

LibMount_LIBRARIES
    The libmount libraries.

LibMount_VERSION
    The libmount version.

    If LibMount_FOUND is TRUE, it will also define the following imported target:

LibMount::LibMount
    The libmount library

    Since 5.83.0

  FindLibcap

Try to find the setcap binary and cap libraries

This will define:

Libcap_FOUND
    system has the cap library and setcap binary

Libcap_LIBRARIES
    cap libraries to link against

SETCAP_EXECUTABLE
    path of the setcap binary

In addition, the following targets are defined:
    Libcap::SetCapabilities

    Since 5.80.0

  FindOpenEXR

Try to find the OpenEXR libraries.

This will define the following variables:

OpenEXR_FOUND
    True if OpenEXR is available

OpenEXR_LIBRARIES
    Link to these to use OpenEXR

OpenEXR_INCLUDE_DIRS
    Include directory for OpenEXR

OpenEXR_DEFINITIONS
    Compiler flags required to link against OpenEXR

    and the following imported targets:

OpenEXR::IlmImf
    The OpenEXR core library

    In general we recommend using the imported target, as it is easier to use. Bear in mind, however, that if the target is in the link interface of an exported library, it must be made available by the package config file.

    Since pre-1.0.0.

  FindPhoneNumber

Try to find PhoneNumber.

This is a component-based find module, which makes use of the COMPONENTS and OPTIONAL_COMPONENTS arguments to find_module. The following components are available:

    PhoneNumber  GeoCoding

If no components are specified, this module will act as though all components were passed to OPTIONAL_COMPONENTS.

This module will define the following variables, independently of the components searched for or found:

PhoneNumber_FOUND
    True if (the requestion version of) PhoneNumber is available

    For each searched-for components, PhoneNumber_<component>_FOUND will be set to TRUE if the corresponding library was found, and FALSE otherwise. If PhoneNumber_<component>_FOUND is TRUE, the imported target PhoneNumber::<component> will be defined.

    Since 5.54.0.

  FindPoppler

Try to find Poppler.

This is a component-based find module, which makes use of the COMPONENTS and OPTIONAL_COMPONENTS arguments to find_module. The following components are available:

    Core  Cpp  Qt5  Qt4  Glib

If no components are specified, this module will act as though all components were passed to OPTIONAL_COMPONENTS.

This module will define the following variables, independently of the components searched for or found:

Poppler_FOUND
    TRUE if (the requested version of) Poppler is available

Poppler_VERSION
    Found Poppler version

Poppler_TARGETS
    A list of all targets imported by this module (note that there may be more than the components that were requested)

Poppler_LIBRARIES
    This can be passed to target_link_libraries() instead of the imported targets

Poppler_INCLUDE_DIRS
    This should be passed to target_include_directories() if the targets are not used for linking

Poppler_DEFINITIONS
    This should be passed to target_compile_options() if the targets are not used for linking

    For each searched-for components, Poppler_<component>_FOUND will be set to TRUE if the corresponding Poppler library was found, and FALSE otherwise. If Poppler_<component>_FOUND is TRUE, the imported target Poppler::<component> will be defined. This module will also attempt to determine Poppler_*_VERSION variables for each imported target, although Poppler_VERSION should normally be sufficient.

    In general we recommend using the imported targets, as they are easier to use and provide more control. Bear in mind, however, that if any target is in the link interface of an exported library, it must be made available by the package config file.

    Since 5.19

  FindPulseAudio

Try to locate the PulseAudio library. If found, this will define the following variables:

PulseAudio_FOUND
    True if the system has the PulseAudio library of at least the minimum version specified by either the version parameter to find_package() or the variable PulseAudio_MINIMUM_VERSION

PulseAudio_INCLUDE_DIRS
    The PulseAudio include directory

PulseAudio_LIBRARIES
    The PulseAudio libraries for linking

PulseAudio_MAINLOOP_LIBRARY
    The libraries needed to use PulseAudio Mainloop

PulseAudio_VERSION
    The version of PulseAudio that was found

PulseAudio_INCLUDE_DIR
    Deprecated, use PulseAudio_INCLUDE_DIRS

PulseAudio_LIBRARY
    Deprecated, use PulseAudio_LIBRARIES

    If PulseAudio_FOUND is TRUE, it will also define the following imported target:

PulseAudio::PulseAudio
    The PulseAudio library

    Since 5.41.0.

  FindQtWaylandScanner

Try to find qtwaylandscanner.

If the qtwaylandscanner executable is not in your PATH, you can provide an alternative name or full path location with the QtWaylandScanner_EXECUTABLE variable.

This will define the following variables:

QtWaylandScanner_FOUND
    True if qtwaylandscanner is available

QtWaylandScanner_EXECUTABLE
    The qtwaylandscanner executable.

    If QtWaylandScanner_FOUND is TRUE, it will also define the following imported target:

Wayland::QtScanner
    The qtwaylandscanner executable.

    This module provides the following functions to generate C++ protocol implementations:

•   ecm_add_qtwayland_client_protocol

•   ecm_add_qtwayland_server_protocol

        ecm_add_qtwayland_client_protocol(<target>
                                          PROTOCOL <xmlfile>
                                          BASENAME <basename>
                                          [PREFIX <prefix>]
                                          [PRIVATE_CODE])
        ecm_add_qtwayland_client_protocol(<source_files_var>
                                          PROTOCOL <xmlfile>
                                          BASENAME <basename>
                                          [PREFIX <prefix>]
                                          [PRIVATE_CODE])

    Generate C++ wrapper to Wayland client protocol files from <xmlfile> XML definition for the <basename> interface and append those files to <source_files_var> or <target>. Pass the <prefix> argument if the interface names don’t start with qt_ or wl_. PRIVATE_CODE instructs wayland-scanner to hide marshalling code from the compiled DSO for use in other DSOs. The default is to export this code.

    WaylandScanner is required and will be searched for.

        ecm_add_qtwayland_server_protocol(<target>
                                          PROTOCOL <xmlfile>
                                          BASENAME <basename>
                                          [PREFIX <prefix>]
                                          [PRIVATE_CODE])
        ecm_add_qtwayland_server_protocol(<source_files_var>
                                          PROTOCOL <xmlfile>
                                          BASENAME <basename>
                                          [PREFIX <prefix>]
                                          [PRIVATE_CODE])

    Generate C++ wrapper to Wayland server protocol files from <xmlfile> XML definition for the <basename> interface and append those files to <source_files_var> or <target>. Pass the <prefix> argument if the interface names don’t start with qt_ or wl_. PRIVATE_CODE instructs wayland-scanner to hide marshalling code from the compiled DSO for use in other DSOs. The default is to export this code.

    WaylandScanner is required and will be searched for.

    Since 1.4.0.

  FindSasl2

Try to find the SASL2 library.

This will define the following variables:

Sasl2_FOUND
    System has SASL2.

Sasl2_VERSION
    The version of SASL2.

Sasl2_INCLUDE_DIRS
    This should be passed to target_include_directories() if the target is not used for linking.

Sasl2_LIBRARIES
    The SASL2 library. This can be passed to target_link_libraries() instead of the Sasl2::Sasl2 target

    If Sasl2_FOUND is TRUE, the following imported target will be available:

Sasl2::Sasl2
    The SASL2 library

    Since 5.41.0.

  FindSeccomp

Try to locate the libseccomp library.

This will define the following variables:

Seccomp_FOUND
    True if the seccomp library is available

Seccomp_INCLUDE_DIRS
    The seccomp include directories

Seccomp_LIBRARIES
    The seccomp libraries for linking

    If Seccomp_FOUND is TRUE, it will also define the following imported target:

Seccomp::Seccomp
    The Seccomp library

    Since 5.44.0.

  FindSharedMimeInfo

Try to find the shared-mime-info package.

This will define the following variables:

SharedMimeInfo_FOUND
    True if system has the shared-mime-info package

UPDATE_MIME_DATABASE_EXECUTABLE
    The update-mime-database executable

    and the following imported targets:

SharedMimeInfo::UpdateMimeDatabase
    The update-mime-database executable

    The follow macro is available:

        update_xdg_mimetypes(<path>)

    Updates the XDG mime database at install time (unless the $DESTDIR environment variable is set, in which case it is up to package managers to perform this task).

    Since pre-1.0.0.

  FindTaglib

Try to find the Taglib library.

This will define the following variables:

Taglib_FOUND
    True if the system has the taglib library of at least the minimum version specified by the version parameter to find_package()

Taglib_INCLUDE_DIRS
    The taglib include dirs for use with target_include_directories

Taglib_LIBRARIES
    The taglib libraries for use with target_link_libraries()

Taglib_VERSION
    The version of taglib that was found

    If Taglib_FOUND is TRUE, it will also define the following imported target:

Taglib::Taglib
    The Taglib library

    Since 5.72.0

  FindUDev

Try to find the UDev library.

This will define the following variables:

UDev_FOUND
    System has UDev.

UDev_INCLUDE_DIRS
    The libudev include directory.

UDev_LIBRARIES
    The libudev libraries.

UDev_VERSION
    The libudev version.

    If UDev_FOUND is TRUE, it will also define the following imported target:

UDev::UDev
    The UDev library

    Since 5.57.0.

  FindWayland

Try to find Wayland.

This is a component-based find module, which makes use of the COMPONENTS and OPTIONAL_COMPONENTS arguments to find_module. The following components are available:

    Client  Server  Cursor  Egl

If no components are specified, this module will act as though all components were passed to OPTIONAL_COMPONENTS.

This module will define the following variables, independently of the components searched for or found:

Wayland_FOUND
    TRUE if (the requested version of) Wayland is available

Wayland_VERSION
    Found Wayland version

Wayland_TARGETS
    A list of all targets imported by this module (note that there may be more than the components that were requested)

Wayland_LIBRARIES
    This can be passed to target_link_libraries() instead of the imported targets

Wayland_INCLUDE_DIRS
    This should be passed to target_include_directories() if the targets are not used for linking

Wayland_DEFINITIONS
    This should be passed to target_compile_options() if the targets are not used for linking

Wayland_DATADIR
    The core wayland protocols data directory Since 5.73.0

    For each searched-for components, Wayland_<component>_FOUND will be set to TRUE if the corresponding Wayland library was found, and FALSE otherwise. If Wayland_<component>_FOUND is TRUE, the imported target Wayland::<component> will be defined. This module will also attempt to determine Wayland_*_VERSION variables for each imported target, although Wayland_VERSION should normally be sufficient.

    In general we recommend using the imported targets, as they are easier to use and provide more control. Bear in mind, however, that if any target is in the link interface of an exported library, it must be made available by the package config file.

    Since pre-1.0.0.

  FindWaylandProtocols

Try to find wayland-protocols on a Unix system.

This will define the following variables:

WaylandProtocols_FOUND
    True if (the requested version of) wayland-protocols is available

WaylandProtocols_VERSION
    The version of wayland-protocols

WaylandProtocols_DATADIR
    The wayland protocols data directory

  FindWaylandScanner

Try to find wayland-scanner.

If the wayland-scanner executable is not in your PATH, you can provide an alternative name or full path location with the WaylandScanner_EXECUTABLE variable.

This will define the following variables:

WaylandScanner_FOUND
    True if wayland-scanner is available.

WaylandScanner_EXECUTABLE
    The wayland-scanner executable.

    If WaylandScanner_FOUND is TRUE, it will also define the following imported target:

Wayland::Scanner
    The wayland-scanner executable.

    This module provides the following functions to generate C protocol implementations:

•   ecm_add_wayland_client_protocol

•   ecm_add_wayland_server_protocol

        ecm_add_wayland_client_protocol(<target>
                                        PROTOCOL <xmlfile>
                                        BASENAME <basename>
                                        [PRIVATE_CODE])
        ecm_add_wayland_client_protocol(<source_files_var>
                                        PROTOCOL <xmlfile>
                                        BASENAME <basename>
                                        [PRIVATE_CODE])

    Generate Wayland client protocol files from <xmlfile> XML definition for the <basename> interface and append those files to <source_files_var> or <target>.

    PRIVATE_CODE instructs wayland-scanner to hide marshalling code from the compiled DSO for use in other DSOs. The default is to export this code.

        ecm_add_wayland_server_protocol(<target>
                                        PROTOCOL <xmlfile>
                                        BASENAME <basename>
                                        [PRIVATE_CODE])
        ecm_add_wayland_server_protocol(<source_files_var>
                                        PROTOCOL <xmlfile>
                                        BASENAME <basename>
                                        [PRIVATE_CODE])

    Generate Wayland server protocol files from <xmlfile> XML definition for the <basename> interface and append those files to <source_files_var> or <target>.

    PRIVATE_CODE instructs wayland-scanner to hide marshalling code from the compiled DSO for use in other DSOs. The default is to export this code.

    Since 1.4.0.

  FindX11_XCB

Try to find the X11 XCB compatibility library.

This will define the following variables:

X11_XCB_FOUND
    True if (the requested version of) libX11-xcb is available

X11_XCB_VERSION
    The version of libX11-xcb (this is not guaranteed to be set even when X11_XCB_FOUND is true)

X11_XCB_LIBRARIES
    This can be passed to target_link_libraries() instead of the EGL::EGL target

X11_XCB_INCLUDE_DIR
    This should be passed to target_include_directories() if the target is not used for linking

X11_XCB_DEFINITIONS
    This should be passed to target_compile_options() if the target is not used for linking

    If X11_XCB_FOUND is TRUE, it will also define the following imported target:

X11::XCB
    The X11 XCB compatibility library

    In general we recommend using the imported target, as it is easier to use. Bear in mind, however, that if the target is in the link interface of an exported library, it must be made available by the package config file.

    Since pre-1.0.0.

  FindXCB

Try to find XCB.

This is a component-based find module, which makes use of the COMPONENTS and OPTIONAL_COMPONENTS arguments to find_module. The following components are available:

    XCB
    ATOM         AUX          COMPOSITE    CURSOR       DAMAGE
    DPMS         DRI2         DRI3         EVENT        EWMH
    GLX          ICCCM        IMAGE        KEYSYMS      PRESENT
    RANDR        RECORD       RENDER       RENDERUTIL   RES
    SCREENSAVER  SHAPE        SHM          SYNC         UTIL
    XF86DRI      XFIXES       XINERAMA     XINPUT       XKB
    XTEST        XV           XVMC

If no components are specified, this module will act as though all components were passed to OPTIONAL_COMPONENTS. Before 5.82 this excluded XINPUT. Since 5.82 all components are searched for.

This module will define the following variables, independently of the components searched for or found:

XCB_FOUND
    True if (the requestion version of) xcb is available

XCB_VERSION
    Found xcb version

XCB_TARGETS
    A list of all targets imported by this module (note that there may be more than the components that were requested)

XCB_LIBRARIES
    This can be passed to target_link_libraries() instead of the imported targets

XCB_INCLUDE_DIRS
    This should be passed to target_include_directories() if the targets are not used for linking

XCB_DEFINITIONS
    This should be passed to target_compile_options() if the targets are not used for linking

    For each searched-for components, XCB_<component>_FOUND will be set to true if the corresponding xcb library was found, and false otherwise. If XCB_<component>_FOUND is true, the imported target XCB::<component> will be defined. This module will also attempt to determine XCB_*_VERSION variables for each imported target, although XCB_VERSION should normally be sufficient.

    In general we recommend using the imported targets, as they are easier to use and provide more control. Bear in mind, however, that if any target is in the link interface of an exported library, it must be made available by the package config file.

    Since pre-1.0.0.

  Findepoxy

Try to find libepoxy on a Unix system.

This will define the following variables:

epoxy_FOUND
    True if (the requested version of) libepoxy is available

epoxy_VERSION
    The version of libepoxy

epoxy_LIBRARIES
    This should be passed to target_link_libraries() if the target is not used for linking

epoxy_INCLUDE_DIRS
    This should be passed to target_include_directories() if the target is not used for linking

epoxy_DEFINITIONS
    This should be passed to target_compile_options() if the target is not used for linking

epoxy_HAS_GLX
    True if GLX support is available

    If epoxy_FOUND is TRUE, it will also define the following imported target:

epoxy::epoxy
    The epoxy library

    In general we recommend using the imported target, as it is easier to use. Bear in mind, however, that if the target is in the link interface of an exported library, it must be made available by the package config file.

  Findgzip

Try to find gzip.

If the gzip executable is not in your PATH, you can provide an alternative name or full path location with the gzip_EXECUTABLE variable.

This will define the following variables:

gzip_FOUND
    TRUE if gzip is available

gzip_EXECUTABLE
    Path to gzip executable

    If gzip_FOUND is TRUE, it will also define the following imported target:

gzip::gzip
    Path to gzip executable

    Since 5.85.0.

SEE ALSO

ecm(7) <#manual:ecm(7)>, ecm-modules(7) <#manual:ecm-modules(7)>, ecm-kde-modules(7) <#manual:ecm-kde-modules(7)>

Copyright
KDE Developers